Floor-type boring machine platform

The North Heavy Floor Boring Machine Platform is a cast iron surface plate used as a worktable on boring machines. The specifications for the floor boring machine platform range from 100mm*100mm to 3000mm*6000mm, with special specifications customized according to the buyer's drawings.
The floor boring machine platform is a cast iron surface plate used as a worktable on boring machines.
Floor boring machine platform specifications: 100*100mm--3000*6000mm (special specifications are made according to the buyer's drawings).
Quality assurance for the floor boring machine platform: Produced according to drawing requirements with a precision of Grade 3 for the boring machine worktable (flatness and T-slot straightness standards comply with national Grade 3 standards, which are twice that of Grade 2 standards). Flatness can be inspected using an optical level, and the straightness of the T-slot can be inspected using an autocollimator.
The floor boring machine platform is made of cast iron. The graphite in cast iron aids in lubrication and oil retention, resulting in good wear resistance. Similarly, due to the presence of graphite, gray cast iron has better vibration damping properties than steel. The castings comply with the HT250 chemical composition standards and meet the requirements for mechanical performance tests. No casting defects such as porosity, sand holes, blowholes, slag inclusions, or cracks are allowed inside or outside the castings.
During the production process of the floor boring machine platform, the design should account for casting and machining errors. The weight error of the floor boring machine platform generally should not exceed 10%. If it exceeds 10%, further quality assessment is required to determine whether the worktable can be put into use. The cast iron floor boring machine platform may have some deviation from the theoretical weight. It is important to note whether this deviation affects the usability of the floor boring machine platform.